PU12 side unit for MACRO perforation circular and shaped with holes from Ø Min. 1mm to Ø Max. 100mm
Description
Space-saving macro perforating unit for punching macro holes of various diameters and shapes on the edge of moving film, especially for neutral and printed film to be integrated as a host unit in film conveying lines such as slitters, extruders, printing presses, welders, bagging machines and in all running film processing lines. These units are ideal for punching holes in fruit and vegetable bags, garbage bags, paper bags, foam, etc. For agricultural applications such as mulching and for large holes.
Operation
The punch tool consists of two parts: a female body housing the die located at the bottom, and a male body housing the punch, located at the top and connected to the solenoid valve. The lower part of the female body is designed to accommodate the suction tube that facilitates the removal of machining waste.
The running film edge passes through the body cutout and is punched by the perforator mounted at the head of the machine through a pneumatically driven die and punch system.
Customized Dies
Depending on the dies and interchangeable punches mounted, holes of various diameters and shapes can be made: circular holes with diameters ranging from Ø1mm to 100mm, valve holes, handle holes, Euroslots, drop holes, holes for mulching, and holes with custom shapes.
In addition to standard measurements of dies and punches, Spark Machinery is ready to provide consultations and solutions for customized processings according to Customer specifications.
Electronics
The EDMB electronics is an easy-to-use model that is intuitive and simple to set up. This electronic is ideal for processing that requires a few lines of holes in a linear or alternating pattern. With the help of a photocell, it is possible to process printed film with the presence of reading marks on the material, such as for holes on bags and envelopes with logos.
-
PP - PET - PVC - LDPE - HDPE - BOPP - CPP - LAMINATE - LEATHER - FAUX LEATHER - COMPOSTABLE - BIODEGRADABLE - NON-WOVEN - TYVEK - FOAM - RAFFIA - PAPER
| TECHNICAL DATA SHEET | |
|---|---|
| Space for material passage | 100mm - 200mm - 300mm - 400mm |
| Maximum speed | 200 mt / minute* |
| Frequency of punching tools | 45 holes per second* |
| Hole Ø | Ø Min. 1mm / Ø Max. 100mm |
| Hole type | Circular - Valve Holes - Shaped |
| Max. number of perforators per device | 1 |
| Position of the perforator | At the head of the device |
| Air pressure | Min. 6 bar |
| Voltage | 400+T- 50Hz V-Hz |
| Compressed air hose inlet | Min. 12 externally calibrated tube |
| * | This value depends on the type of material |
| OPERATION |
|---|
| Custom PLC |
| For EDMB and EDMB8 versions: box with buttons |
| 24VDC power supply |
| 24VDC incremental encoder input |
| Two rapid fire command inputs or signals enable/ disable |
| 4 protected digital outputs for EDM and EDMB model. |
| 8 protected digital outputs for model EDMB8 |
| Connection via bluetooth for board diagnostics |
| SOFTWARE FUNCTIONS |
|---|
| Shooting on signal with linear pattern |
| Shooting on signal with alternating pattern (zig-zag) |
| Linear encoder |
| Alternating encoder (zig-zag) |
| Simultaneous shooting in linear mode at a set distance from the eyemark with photocell |
| Simultaneous shooting in alternating mode (zig-zag) at a set distance from the eyemark with photocell |
| Power adjustment |
| Quick Commands |
| Optionals |
|---|
| Photocell |
| Encoder |
| Pressure Filter Regulator |
| Soundproofing |
| Casing |
| Suction |
| Electronics |
Get in touch with one of our experts to order a product
