PU10 side unit for MACRO perforation circular and shaped with holes from Ø Min. 1mm to Ø Max. 16mm
Description
REDUCED SIZE macro punching unit designed to punch MACRO HOLES of 1 to 16mm diameter ON THE EDGE OF MOVING FILM, especially for NEUTRAL OR PRINTED FILM to be integrated as a host unit in film conveying lines such as slitters, extruders, printing machines, sealing machines, bag machines and in all MOVING FILM processing lines. For punching holes in fruit and vegetable bags, garbage bags, paper bags, foam, etc.
Operation
The edge of the running film passes through the body space and is punched by the perforator mounted at the top of the device through a pneumatically driven punch and die system. The punching tool consists of two parts: a female body housing the die located at the bottom and a male body housing the punch located at the top and connected to the solenoid valve. The hole is made through this pneumatically moving punch and die system, controlled by an electronic control.
Punches
Depending on the interchangeable punches and dies used, it is possible to obtain holes with Ø 1mm to 16mm, circular holes, valve holes, butterfly holes and half-moon holes.
Electronics
The EDMB electronics is an easy-to-use model that is intuitive and simple to set up. This electronic is ideal for processing that requires a few lines of holes in a linear or alternating pattern. With the help of a photocell, it is possible to process printed film with the presence of reading marks on the material, such as for holes on bags and envelopes with logos.
-
PP - PET - PVC - LDPE - HDPE - BOPP - CPP - LAMINATE - LEATHER - FAUX LEATHER - COMPOSTABLE - BIODEGRADABLE - NO-WOVEN - TYVEK - FOAM - RAFFIA - PAPER
| TECHNICAL DATA SHEET | |
|---|---|
| Space for material passage | 100mm - 200mm |
| Maximum speed | 200 mt / minute* |
| Frequency of punching tools | 45 holes per second* |
| Hole Ø | Ø Min. 1mm / Ø Max. 16mm |
| Hole type | Circular, valve, butterfly and half-moon holes |
| Max. number of perforators per device | 1 |
| Position of the perforator | At the head of the device |
| Air pressure | Min. 6 bar |
| Voltage | 400 V+N+E - 50Hz |
| Compressed air hose inlet | Min. tube 8 externally calibrated |
| * | Value affected by the type of material |
| OPERATION |
|---|
| Custom PLC |
| For EDMB and EDMB8 versions: box with buttons |
| 24VDC power supply |
| 24VDC incremental encoder input |
| Two rapid fire command inputs or signals enable/ disable |
| 4 protected digital outputs for EDM and EDMB model. |
| 8 protected digital outputs for model EDMB8 |
| Connection via bluetooth for board diagnostics |
| SOFTWARE FUNCTIONS |
|---|
| Shooting on signal with linear pattern |
| Shooting on signal with alternating pattern (zig-zag) |
| Linear encoder |
| Alternating encoder (zig-zag) |
| Simultaneous shooting in linear mode at a set distance from the eyemark with photocell |
| Simultaneous shooting in alternating mode (zig-zag) at a set distance from the eyemark with photocell |
| Power adjustment |
| Quick Commands |
| Optionals |
|---|
| Photocell |
| Encoder |
| Pressure Filter Regulator |
| Soundproofing |
| Casing |
| Suction |
| Electronics |
Reach out to our expert team to order a product.
