The model PC0 to make Cross pre-cuts on moving film at customizable distances
Description
The PC0 model is a motorized device to be installed as a host unit in extruders, slitters, printing and welding machines, and in all processing lines of moving films. It makes transverse pre-cuts on materials of different thicknesses with customizable width. The unit makes easy tear openings on bags, garbage bags, shoppers, labels, etc.
Operation
The running film arrives at the machine and is pre-cut by the blade shaft that comes in contrast to the counter roller supporting the material.
The PC0 moves thanks to the drive system that consists of an integrated brushless motor, driver and encoder that synchronize the speed of the blade shaft with the movement speed of the film, reaching up to 100mt/min.*. This system prevents stretching of the processed material, ensuring consistently precise cuts and equalizing the speed of the device to that of the host line or machine.
Device components
Pre-cutting group
The pre-cutting unit consists of a shaft with toothing (1) on which the toothed blades (2) are screwed. When ordering, it is possible to choose the number of blade lines to be mounted on the shaft, up to a maximum of 4 lines.
The depth of the cut on the material is adjustable manually using screws located on the sides of the shaft. With the adjustment system you can move the contrast roller closer or further away, deciding whether to enable or disable cutting and the penetration level of the blades (on which depends the length of the cuts).
Support group
It consists of the support roller (3) made of rectified bristles or rubber (depending on the processes to be carried out) and the slides. The roller supports the material while it is being processed, acting as a cutting support and thus ensuring the best results. This roller is mounted on movable slides that move it towards or away from the material, enabling or disabling cutting.
Idler Roller
The device is equipped with an idler roller that guides the material to the pre-cut and facilitates its tension, maximizing the effectiveness of the device.
Casing
The casings contain the unit and are equipped with opening doors and a safety system that prevents the unit from starting processing when the doors are open.
Electrical Panel
The operator interface is entrusted to our software designed for 4.0 integration. Intuitive and user friendly, the electronic control system allows the operator, via touch screen, to manage all the functions of the appliance and receive system communications.
-
PP - LDPE - HDPE - LAMINATED - COMPOSTABLE - BIODEGRADABLE - NON-WOVEN - TYVEK - FOAM - RAFFIA
| TECHNICAL DATA SHEET | |
|---|---|
| Description | Transverse pre-cutting machine for moving film |
| Maximum Speed | 100* mt minute |
| Minimum distance between pre-cuts | 150 mm |
| Type of pre-cut | Cross |
| Position of the pre-cutting blades | On blade shaft |
| Max no. of blades | 2 |
| Blade shaft movement | Brushless motor with driver and encoder |
| Air pressure | Min. 6 bar |
| Voltage | 400+T-50 V-Hz |
| Compressed air hose inlet | Min. 12 externally calibrated tube |
| Penetration adjustment | Manual |
| Drive | Electronics with 4.0 integration |
| * | Value affected by the type of processed material |
| PRE-CUT OPERATION |
|---|
| Custom PLC |
| Industrial computer |
| Integrated touch screen |
| Software with 4.0 integration |
| Recipe management |
| Recipe storage |
| OPTIONALS |
|---|
| Electronics |
| Photocell |
| Encoder |
| Trolley on wheels or rails |
| Number of blades |
Reach out to our expert team to order a product.
